Toyta Push Switch Panel for Hulix, RV4, Vigo

Toyta push switch panel for Hulix, RV4, vigo

Innovative Touch Screen Panel
We've experienced in swich field for a couple of years, our engineers spent more than one year honing the design of this 6 way Capacitive Touch Screen Panel for those with limited mounting space behind the console and those who are looking for the new style switch panel that reduces the mess of wiring at the back of the switch! It's unique, sleek & compact, great for car, truck, pickup, boat, yacht, marine and more.
High Sensitivity
With the 15-pin VGA cable, there is a good interactivity from touch screen switch to the device(s). Switch your horn, fan, speaker, stereo, lights and or devices ON/OFF just a light touch.
Compact & Sleek
Panel dimensions: 3.15'' x 3.94'' x 0.39''; Control box dimensions: 3.35'' x 5.31'' x 1.18''; Mounting hole dimensions: 0.79'' x 1.97''. Control all your devices (up to 6) on 1 panel. Idea for dashboard/console improvement, do not worry about it's messy anymore
Water-resistant
Marine-grade panel, waterproof rating at IP67 and dust resistance.
Simple to Install
Plug-N-play

Installation Instructions:
1.Place the template provided on the desired panel position and cut the hole accordingly.

2.From the back of dashboard, insert the micro USB plug to the front. Connect the micro USB plug to the socket to the back of panel.

3.Mount the panel firmly onto the dashboard with self-adhesive in the back.

4.Install the Control Box properly with the included screws.
Insert the other end of the micro USB cable into the Control Box. Squeeze the cable into the strain relief hook on the box as illustrated.

5.Crimp the DC positive wire (+) with the included round terminal. Pass the
wire through the included insulator and connect to the screw terminals. Cover the terminals with the insulator properly. Crimp the DC negative wire (-) with the insulated 0.250" female terminal and insert into the negative quick terminal on Control Box.
Connect the load terminals to the desired devices.The numbers on top of the load terminals correspond to the numbers on the membrane touch 1 2 3 panel as shown in the left.

6.(Momentary Button Set-up) To set up a specific button to be momentary
(Push-On), press the button and the backlight button simultaneously for
more than 5 seconds until the button blinks. All buttons can be set to be
momentary. To undo this (change the button back to ON-OFF), simply repeat the process again on the same button.

Control Panel
Backlight ON/OFF Switch
Micro USB Cable
Remote Control Box